Contact Burbank Garage Door Pros
Serving Burbank, CA and the surrounding area.
- 3400 W Riverside Dr, Burbank, CA 91505
- (747) 368-2427
- Open 7 days · 7am–8pm
Ready for a quote? Request a quote and tell us what your door’s doing - the more detail, the faster we can help.
What We Actually Do
We work on the mechanical parts of a residential garage door: torsion and extension springs, openers, tracks, rollers, cables, and panels. Burbank's housing stock runs from 1943 up through 2012, with a median build year of 1959, which means a lot of the doors we see are original hardware on houses that have been re-roofed and re-piped twice over but never had the garage touched. That's the job we're set up for - diagnosing why a 1959-era torsion setup is binding, or why an opener installed a decade ago won't talk to its remote anymore.
What we don't do is new construction framing or structural carpentry around the opening itself. If your door problem turns out to be a header that's sagging or a jamb that's rotted through, that's a call to a general contractor first, and we'll tell you that straight rather than bill you for a repair that won't hold. Our work starts at the track and ends at the wall bracket.
We cover Burbank itself and the nearby areas - Magnolia Park, Toluca Lake, the NoHo Arts District, North Hollywood, Studio City, and out toward Sun Valley and Valley Village. If you're further out than that, call first and ask; we'd rather tell you no than show up late.
How to Reach Us
Call (747) 368-2427. That's the number that reaches a person who can talk through what your door is doing - grinding, refusing to open, drifting shut on its own - and get a truck routed to you. We're located at 3400 W Riverside Dr, Burbank, CA 91505, a couple miles from Toluca Lake and about three from the NoHo Arts District, so most calls from central Burbank, Magnolia Park, or North Hollywood are a short drive for us, not a cross-town haul.
If you can, have the door's brand or the opener's model number ready when you call - it's usually printed on a sticker on the motor housing or the spring itself. It's not required, but it saves a step once we're on site.
- 1
Call and tell us what it’s doing
(747) 368-2427 - describe the symptom and roughly where you are.
- 2
Or send it in writing
Use the quote request form if it’s easier than talking - same information, same day’s queue.
- 3
We diagnose on site
A technician tests the door under power and by hand before anything is quoted or replaced.
- 4
You approve the plan
You hear what failed and what it takes to fix it - the work starts only after that.
Who Does the Work
The person who answers the phone is coordinating with the person who shows up at your house - we don't route calls through a national dispatch center that's never seen your street. Given how much of Burbank's housing dates to the 1950s and 60s, a good share of our jobs involve matching parts to hardware that hasn't been made in decades, so whoever's on your job needs to know what a 1959 torsion bracket looks like versus a 2005 one before touching either.
We don't publish a roster of names or a headcount here, and we're not going to invent one to fill space. What we can tell you is that repairs are diagnosed and priced on site, not guessed at over the phone, because a spring problem and a track problem can sound identical to someone standing in the driveway.
What Happens After You Call
You describe what the door is doing, we ask a few questions to narrow down spring versus opener versus track, and we get a truck scheduled. On site, the tech looks at the actual hardware before quoting anything - on a lot of Burbank's older homes that means checking whether the torsion spring is original to a house built well before 1980, since that's often the piece that's failed and the piece that's hardest to source without knowing the shaft size first.
If the fix is straightforward - a broken cable, a worn roller, a sensor knocked out of alignment - it usually gets done in the same visit. If it turns out the opener itself is done, or the door needs a part that has to be ordered, we'll say so instead of jury-rigging something that fails again in a month. That's the one honest limit here: we carry common spring sizes and hardware on the truck, but not every model, and a discontinued opener board can mean a wait we don't control.
Door stuck open or won’t close?
A garage door that won’t close leaves your home open. Tell us what’s happening and we’ll help you figure out the fastest way to get it secured.
Serving Burbank & nearby
Local garage door service across 70 Burbank-area neighborhoods and communities - is your street on the list?
Frequently asked
Straight answers about garage door repair in Burbank. Still unsure? Ask us directly.
How old is my garage door likely to be if my house was built in the 1950s?
If your house dates to that era and the door still looks original, it's likely the same door, possibly with a replaced spring or two along the way. Steel panel doors from that period can last decades with maintenance, but the springs and cables rarely make it past 20-30 years without failing.
Do you carry parts for older, discontinued garage door models?
Sometimes. Standard hardware like springs and cables we usually have on the truck. Exact-match panels for a specific 1950s or 60s profile are less common, and if yours needs one, we may have to order it rather than fix it same-day.
Is it worth repairing a garage door that's original to a house from the 1950s?
Depends on condition. If the track, hinges, and panels are solid and it's just a spring or cable, repair makes sense. If the steel is rusted through or the opening's badly out of square from foundation settling, replacement usually costs less over time than repeated patch jobs.
Why does my opener grind or slip even though the door itself moves fine?
That's usually the opener's gear or chain wearing out independent of the door hardware, common on units that have outlasted their rated lifespan. It's a different fix from a spring or track problem, and we check both separately before quoting.
Ready to get your garage door sorted?
Tell us what it’s doing and where you are in Burbank - we’ll take it from there.